Bulk Cement
CEMI 42.5 N
It is general purpose Portland cement which is known and found all over the world. It results from crushing clinker and gypsum to fulfill the requirements of the standard specifications the ES 4756-1/2022 and EN 197-1/2011.
Characteristics:
It is produced according to t Egyptian standards ES 4756/1-2022 and complies with European specifications EN 197/1-2011.
Physical characteristics:
Cement Standard Specifications Limits
Initial setting time (min) | ≥ 60 |
Soundness (expansion) mm | ≤ 10 |
Compressive strength 2D (Mpa) | ≥ 10 |
Compressive strength 28D (Mpa) | ≥ 42.5 |
Chemical Characteristics:
Cement Standard Specifications Limits
Loss of ignition | ≤ 5 % |
Insoluble residues | ≤ 5 % |
Sulphate (SO3) | ≤ 3.5 % |
Chloride content (CL-) | ≤ 0.1 % |
Target Market:
- Ready mix companies
- General contractors
- Precast companies
- Pre-blending companies
Applications:
- General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).
- All uses where the special properties of other type are not required
- Where high compressive strength is required
- It is used where cement concrete is not subject to specific exposures, such as sulphate attack from soil or water
Available in
- Bulk
Locations
More info by clicking the pins